Skip to main content
Resources

Resources & Support

Catalog, spec sheets, FAQs, blog, and re-rental — plus direct lines to a specialist when you need one.

Resource

Product Catalog

Full WorkSite Lighting product line in a single downloadable PDF.

Open
Resource

Spec Sheets

Per-product PDF specs with ratings, dimensions, and certifications.

Open
Resource

FAQs

Common questions from buyers, procurement, and field engineers.

Open
Resource

Blog

Field notes on hazardous lighting, codes, and jobsite practice.

Open
Program

Re-Rental Program

Rent towers, distribution, and fixtures for jobsite-duration use.

Open
Support

Customer Support

Real people, real spec answers — not a ticket queue.

Open
Support

Return Goods Authorization (RGA)

Process for returning or exchanging product.

Open
WorkSite Blog

Temporary Power Distribution for Data Center Construction: The Bottleneck Most Teams Plan Too Late

Learn how temporary power distribution helps data center construction teams reduce delays, plan lighting, support trades, and keep job sites moving.

Open
WorkSite Blog

Vapor-Tight vs. Explosion-Proof: Choose the Right Protection

Understand the difference between moisture protection and hazardous-location approval before choosing a work light.

Open
WorkSite Blog

How to Install Temporary Construction Site Lighting

Plan the work areas, suitable fixtures, protected cable routes and inspection routine before temporary lighting is installed.

Open
WorkSite Blog

Choosing a Mount for a Hazardous-Location Light

Compare hooks, magnetic supports, brackets and fixed mounts using the exact light's instructions and the working position.

Open
WorkSite Blog

Choosing an Outdoor Junction Box: Understand IP68 and the Installation

Choose an outdoor enclosure using its documented water protection, cable entries, materials and installation conditions.

Open
WorkSite Blog

What Is Portable Explosion-Proof Lighting?

Portable lighting brings the source to changing industrial tasks; its exact approval and electrical arrangement determine permitted use.

Open
WorkSite Blog

Explosion-Proof Lighting Standards: A Practical Compliance Review

Review the adopted code, area classification, exact product approval and installation requirements before selecting hazardous-location lighting.

Open
WorkSite Blog

What Does Explosion-Proof Mean for Industrial Lighting?

Understand explosionproof construction, location markings and the difference between ignition protection and environmental sealing.

Open
WorkSite Blog

Dual-Light Flashlights: Separate the Walking View from the Task Beam

A spot beam and a nearby flood serve different jobs. Compare their controls, carrying position and exact hazardous-location approval.

Open
WorkSite Blog

Color Temperature in Industrial Lighting: Choose for the Visual Task

Compare color temperature with color rendering, glare and light distribution rather than using Kelvin as a brightness or safety rating.

Open
WorkSite Blog

Class I, Division 1 vs. Division 2 Lighting

Understand how location classification affects lighting selection without assuming a universal fixture design or installation recipe.

Open
WorkSite Blog

Choosing a Temporary Power Distribution Box

Compare input, output circuits, connectors and handling requirements for tools and temporary lighting.

Open
WorkSite Blog

Oil-Rig Lighting: Compare Fixtures for the Work Area

Evaluate offshore lighting by exact approval, exposure, light distribution and maintainability without assuming one fixture fits every location.

Open
WorkSite Blog

Intrinsically Safe and Explosion-Proof Equipment in Real Workflows

Compare protection methods across portable inspection, fixed equipment and maintenance without treating either as universally suitable.

Open
WorkSite Blog

IP64 Protection: What the Rating Covers and What It Does Not

IP64 addresses dust and splashing water. Check the complete product instructions before choosing equipment for industrial exposure.

Open
WorkSite Blog

Intrinsically Safe vs. Explosion-Proof Flashlights: Compare the Approval

Understand energy limitation and enclosure protection, then match the exact flashlight approval to the work area.

Open
WorkSite Blog

Explosion-Proof LED Lighting: What to Check Before Selection

Compare hazardous-location LED lights by exact approval, light distribution, electrical arrangement and service conditions.

Open
WorkSite Blog

ATEX, IECEx and UL: Which Approval Does the Job Require?

Separate EU conformity, international certification and North American product acceptance when specifying hazardous-location lighting.

Open
WorkSite Blog

Where Is Hazardous-Location Lighting Required?

Use the documented area classification to determine lighting requirements for gas, vapor, combustible-dust and fiber hazards.

Open
WorkSite Blog

Choosing Lighting for a Paint Booth: Location and Visual Task

Select paint-booth lighting using the booth classification, permitted installation arrangement and the finish-inspection task.

Open
WorkSite Blog

Portable Hand Lamps for Oil and Gas Maintenance

Use hand lamps for close inspection and repair work, with the complete electrical assembly matched to the location.

Open
WorkSite Blog

Temporary Construction Lighting: OSHA Requirements to Plan Around

Plan construction illumination and temporary wiring using the task-specific OSHA requirements and equipment instructions.

Open
WorkSite Blog

Confined-Space Lighting: Match Voltage to the Work Conditions

Separate entry hazards, wet/conductive electrical requirements and hazardous-location approval when choosing a confined-space light.

Open
WorkSite Blog

Drop Light, Trouble Light or Explosion-Proof Handlamp?

The everyday name describes a portable light. Its exact markings establish where and how it can be used.

Open
WorkSite Blog

Explosion-Proof LED Lights: Protect the Approved Assembly

Understand why enclosures, entries, mounting and replacement components matter to a hazardous-location light's documented protection.

Open
WorkSite Blog

Planning Lighting for Refinery Inspection and Maintenance

Coordinate classified-area requirements, working positions and temporary power before selecting refinery lighting.

Open
WorkSite Blog

UL Standards and Hazardous-Location Lighting Markings

Use the exact certification record and equipment marking, not a standard number alone, to check a lighting configuration.

Open
WorkSite Blog

Choosing Temporary Construction Lighting for a Changing Site

Match string lights, overhead lights and portable task lights to the stage of work, power route and access requirements.

Open
WorkSite Blog

Ten Maintenance Tasks for a Wet-Location Hand Lamp

A hand lamp brings light to close maintenance work. Match its environmental and electrical ratings to each task.

Open
WorkSite Blog

Explosion-Proof Lighting Classes, Divisions and Groups

Read the location class, division, group and temperature marking as separate requirements when selecting a work light.

Open
WorkSite Blog

Vapor-Proof Hand Lamps for Damp Maintenance Areas

Choose a portable inspection lamp using its actual wet-location rating, materials and electrical arrangement.

Open
WorkSite Blog

Industrial Lighting and Temporary Power: Choose by Equipment Role

Hand lamps, string lights, portable area lights and power assemblies serve different parts of an industrial work setup.

Open
WorkSite Blog

Conquer Linear LED Lighting for Industrial Work Areas

Compare Phoenix Conquer Linear sizes and understand the distinction between general ambient and hazardous-location temperature limits.

Open
WorkSite Blog

Hazardous-Location Lighting: From Classification to Maintenance

Use a documented chain from area requirements to equipment selection, installation and maintenance.

Open
WorkSite Blog

Hazardous-Location Protection Methods: A Selection Overview

Understand what protection concepts and approval records describe before comparing industrial lighting.

Open
WorkSite Blog

Rack-Pack Welding Racks: Organize Machines and Local Power

A welding rack brings several machines and their connections into one assembly; confirm the exact power and accessory arrangement.

Open
WorkSite Blog

Choosing Confined-Space Lighting for the Actual Entry Conditions

Separate the entry plan, electrical exposure and lighting task before selecting a portable configuration.

Open
WorkSite Blog

Portable Explosion-Proof Lighting: Plan the Complete Working Setup

Plan lamp position, power, connections and servicing together when portable lighting enters a classified work area.

Open
WorkSite Blog

Choosing a Portable Explosion-Proof LED Work Light

Compare portable light formats by the approval, working view, supply and mounting arrangement required for the task.

Open
Selection guide

Task lighting: start with the surface you need to see

A walkway, a machine label and the inside of a vessel are different visual tasks. Separating them makes it easier to choose between a hand lamp, an area light and a personal light without treating brightness as the only deciding factor.

Open
Selection guide

Temporary power: understand the equipment interfaces

Distribution, transformation and extension are separate equipment roles. Reading the source connection, the equipment label and the outlets as a connected set helps explain what a product does before any installation is designed.

Open
Selection guide

String lights: compare the assembly, not just the lamp count

Linear work areas benefit from thinking about the full lighting run: the tasks along it, the supported cable route and the published construction of the complete string. Lamp count is a useful description, but it is not a lighting design.

Open
Selection guide

Headlamp, right-angle light or handheld light?

Personal lights differ in how they move with the user. A useful comparison starts with carrying position, beam role and the power routine, then checks the exact model’s published approvals and accessories.

Open
Selection guide

Mounting a work light: support, viewpoint and access

Mounting changes where light can reach and how a person can work around it. Compare the support arrangement and the view of the task before deciding which published product and accessory combination to investigate.

Open
Selection guide

Read a cord assembly from end to end

A cord assembly is more than a cable length. Its terminations, published construction and electrical ratings describe its intended interfaces. Comparing those fields helps separate superficially similar products.

Open
Selection guide

Welding racks: compare the rack and distribution assembly

A multi-operator welding rack combines equipment organization with model-specific power and accessory arrangements. Compare the actual assembly rather than treating every rack frame, power package and welder interface as equivalent.

Open
Selection guide

Read product documentation without mixing up the claims

A product family name, an individual model label and a project-specific requirement are different records. Keeping them separate makes product comparisons clearer and helps prevent an attractive description from standing in for missing evidence.

Open
Selection guide

Wet-location protection and classified-location approval

Water exposure and a classified atmosphere describe different aspects of a work environment. A useful product comparison keeps environmental protection, electrical information and the documented location approval in separate fields.

Open
Tools

Extension Cord Configurator

Choose your connections, cable and length. Request a reviewed quote.

Open