1. What is the KBS Innovations Raptor Flood Rechargeable Lantern?
The Raptor Flood is an intrinsically safe, rechargeable lantern-style LED work light
designed for wide-area illumination in hazardous locations such as refineries,
chemical plants, tank farms, mining operations, and emergency response scenes.
2. What makes this lantern “intrinsically safe”?
“Intrinsically safe” means the lantern’s electronics and battery system are engineered
so they cannot release enough electrical or thermal energy to ignite flammable gases,
vapors, or dust under normal or fault conditions. This allows use in designated
hazardous (classified) locations where ignition risk must be tightly controlled.
3. Which safety ratings and certifications does it have?
The Raptor Flood is designed for use in hazardous locations and is certified to
relevant standards such as Class I, Division 1 and comparable international
hazardous-location ratings (such as ATEX/IECEx) depending on the exact model
and region. Always refer to the nameplate and documentation for the official
certification list.
4. How bright is the Raptor Flood?
This configuration delivers approximately 325 lumens of high-output LED
light. The optical system is tuned for a usable work beam that lights up
the area where you’re actually working, not just a tight hotspot.
5. What kind of beam pattern does it produce?
The Raptor Flood uses a wide-angle flood beam with a bright center zone and strong
side spill. This beam pattern is ideal for illuminating work zones, machinery,
walkways, and incident scenes where you need both coverage and clarity.
6. What lighting modes are available?
The lantern offers multiple lighting modes so you can balance output and runtime,
including:
- High-output flood for maximum brightness
- Reduced-power flood for extended runtime
- Additional task or signaling modes (depending on configuration)
7. How long does the battery last on a single charge?
Runtime depends on the selected mode and operating environment. On higher-power
modes you can expect multi-hour operation, while lower-output modes are designed
to cover most or all of a work shift. Always consult the specification sheet for
exact runtime values by mode.
8. What type of battery does it use?
The Raptor Flood uses an integrated rechargeable lithium-ion battery pack. Li-ion
technology provides high energy density, reduced weight, and consistent light output
across the discharge cycle compared with many older chemistries.
9. How do you charge the Raptor Flood?
Charging is done via a dedicated charging base. Simply place the lantern in the dock
and connect the base to an appropriate AC or DC power source (depending on your
charger version). Status LEDs on the charger or lantern indicate charging progress.
10. Is the charger and battery included with the light?
Standard kits typically include the lantern, rechargeable battery pack, charging base,
and power cords (AC and/or DC depending on the kit), so you are ready to deploy
immediately. Check the “What’s Included” section to confirm exact contents.
11. How rugged is the housing?
The lantern uses a high-impact, industrial-grade polymer housing designed to
withstand drops, bumps, and tough daily use in industrial and emergency environments.
The lens and head assembly are engineered to resist impact and chemical exposure.
12. Is the Raptor Flood waterproof or dustproof?
Yes. The enclosure is sealed against dust and moisture and is rated for use in
demanding environments where rain, spray, or wash-down conditions are common.
Refer to the spec sheet for the exact IP rating.
13. How heavy is the light, and is it comfortable to carry?
The Raptor Flood is engineered as a lightweight, full-size lantern. Its balanced
top handle, optional shoulder strap, and compact footprint make it comfortable to
carry, even on extended shifts.
14. Does it have rear-facing LEDs or a taillight?
Many Raptor configurations include rear-facing LEDs (often selectable in white or red)
that can operate in steady or flashing modes. These rear lights function as a safety
“taillight” so teammates can easily see your position in smoke, fog, or cluttered
work zones.
15. Can the head be tilted or articulated for hands-free use?
Yes. The lantern head can be tilted or articulated to aim the beam where you need it
while the base stays flat on the ground, truck bed, or platform. Combined with the
stable base and strap, this makes it easy to use as a hands-free area light.
16. How do I check the remaining battery charge?
A built-in battery status indicator (typically a multi-level LED gauge) shows the
approximate remaining charge. This lets you quickly verify battery status before
entering a confined space or hazardous area.
17. Where is the Raptor Flood manufactured?
The Raptor Flood is designed and assembled by KBS Innovations using high-quality
components and manufacturing partners specializing in industrial and hazardous-location
lighting solutions.
18. What industries commonly use this lantern?
Typical applications include:
- Oil & gas production and refining
- Chemical and pharmaceutical plants
- Mining and tunneling
- Tank farms and pipeline maintenance
- Utilities and industrial maintenance
- Emergency response and rescue
- Marine and offshore operations
19. How does it compare to traditional halogen or HID lanterns?
Compared with older halogen or HID lanterns, the Raptor Flood’s LED system offers:
- Longer runtimes on a single charge
- Cooler operation with less heat
- No fragile bulbs, filaments, or ballasts
- Instant full-brightness with no warm-up time
- Compatibility with modern intrinsically safe designs
20. Do you provide cross-reference information to similar intrinsically safe lanterns?
Yes. Many end users compare the Raptor Flood to intrinsically safe rechargeable
lanterns from brands like Streamlight, Nightstick, and Bright Star. Below is a list of competitor part numbers for reference only.
Reviews
There are no reviews yet