Phoenix's Conquer Series Linear is a low-profile industrial LED fixture family with separate size, supply and mounting choices. Its hazardous-location and high-temperature information must be read together rather than combined into one blanket rating.
Two sizes with documented output
Phoenix lists a 2-foot, 60W version producing 6,600 lumens and a 4-foot, 80W version producing 9,400 lumens. The family has 120V or 277V, 50/60Hz supply options and a nominal 5000K color temperature. Mounting accessories are ordered separately.
Temperature limits depend on the approval
The manufacturer's general ambient operating range is −40°C to +85°C. Its UL 844 hazardous-location listing is shown for −40°C to +55°C. Do not assume the +85°C general operating limit extends the hazardous-location listing.
Read the full hazardous-location marking
Phoenix lists Class I, Division 2, Groups A, B, C and D, T4; Class II, Division 2, Groups F and G, T4A; and Class III. The manufacturer also identifies wet-location suitability, IP67 and NEMA 6. These are separate scope statements, not a universal approval for every plant area.
Specify the actual installation
Confirm length, supply, mounting, ambient conditions and the exact ordering code against the current manufacturer sheet. Use the site's classification and installation requirements to establish suitability. Contact WorkSite Lighting for the current configuration and availability rather than relying on a dated launch announcement.
References: Phoenix Products — Conquer Series Linear · OSHA 1910.307 — Hazardous (classified) locations