Razor FSL Intrinsically Safe Flashlight – Explosion-Proof, IP64-Rated, Class I, II, III Certified

The Razor FSL (Model #60170) is certified as intrinsically safe for use in hazardous environments. It holds certifications for:

• Class I, II, III Division 1 Groups A-G T2
• Class I, II, III Division 2 Groups A-D, F, G T2
• SGS21ATEX0124
• IECEx BAS 21.0042
• BAS21UKEX0609
• IP64 Rating (protection against dust and splashing water)

2. What is the operating temperature range of the flashlight?

The Razor FSL operates reliably in temperatures from -20°C to +40°C (-4°F to +104°F).

3. Which batteries are approved for use with the Razor FSL?

Only the following AA alkaline batteries are approved:

• KBS Power Solutions: Models KA2500 or KA2600 MaxX
• Rayovac High Energy LR6
• Energizer E91

4. How do I operate the main LED functions?

Main LED Button Operations:

• 1st Press: Activates High Mode
• 2nd Press: Switches to Low Mode
• 3rd Press: Turns the main LED OFF

5. How do I use the downlight LED functions?

Downlight LED Button Operations:

• 1st Press: Turns the Downlight ON
• 2nd Press: Turns the Downlight OFF
• Combo Mode: While the main LED is on, press the downlight button to activate both lights simultaneously

6. What is the runtime of the flashlight on different modes?

The flashlight offers up to 12 hours of runtime on approved batteries. Runtime may vary based on the mode:

• High Mode: Shorter runtime due to maximum brightness
• Low Mode: Extended runtime for prolonged use
• Combo Mode: Runtime will be reduced compared to single-light modes

7. How do I safely replace the batteries?

Battery Replacement Steps:

1. Ensure you are in a non-hazardous location.
2. Unscrew the bottom cap to access the battery compartment.
3. Remove old batteries and insert new, approved batteries following the polarity markings.
4. Screw the bottom cap back on securely.

8. What safety precautions should I observe?

Important Warnings:

• Do not replace batteries in hazardous locations to prevent the risk of ignition.
• Do not mix old and new batteries or different brands/types.
• Prevent dust layers from accumulating on the flashlight.
• Do not open the flashlight when an explosive atmosphere is present.
• Do not leave the flashlight energized and unattended in Zone 20 areas.
• Substitution of components may impair intrinsic safety—use only specified parts.

9. What is the voltage requirement for the Razor FSL flashlight?

The flashlight operates at 4.5 volts, supplied by three AA alkaline batteries.

10. What materials and construction features contribute to its durability?

The Razor FSL is built with industrial-grade materials designed for high performance and rough use. Its construction ensures:

• Impact resistance for durability in demanding environments
• IP64 rating for protection against dust ingress and water spray
• Temperature resilience for operation in extreme conditions